ATtiny Robotics Projects
Collection by Anand
Building robots using #ATtiny Microcontroller for beginners.The microcontroller showcased here are ATtiny85,ATtiny2313,ATtiny10
LED Polyhedron
Charlieplexed LEDs 3D-soldered together to make blinky platonic solids!
PubNub's Ian Jennings demonstrates how to connect your Arduino to a mobile cellular network with a GSM/GPRS shield. There's a ton of tutorials out there on hooking your Arduino up to the LAN, wheth...
Attiny 13A line follower
ATtiny based bidirectional motor control using L293D
Hello friends,In this ATtiny based Project we will learn to interface L293D with ATMEL ATtiny microcontroller and control them bidirectionally.The microcontroller used here is ATtiny2313A which is interfaced to two L293D motor control chips for controlling upto 4 DC brushed motors.You can control upto 8 motors if bidirectional control is not needed. The ability to control upto
xanthium enterprises
Here is the completed ATtiny2313A development board with Twin L293D motor control chip and MAX485 based RS485 port. Learn how to interface L293D chip with ATtiny2313A Microcontroller RS485...
Upgrade Analog Line Follower to Arduino With Attiny85
Summary In this Instructable we will show you how to upgrade a cheap analog line follower into an intelligent Arduino line follower by replacing the LM393 comparator IC by an intelligent Attiny85 and Arduino sketch. Introduction Line follower robots can be bought cheaply; you can buy DIY kits through Banggood, Ebay and Aliexpress from about 7 Euros. Ours is built from a PCB and two geared motors.
xanthium enterprises (@InXanthium)
The latest Tweets from xanthium enterprises (@InXanthium). A website for Embedded System and Robotics enthusiasts. Bengaluru, Karnataka
Supercapacitor Programmable Attiny LED Flashlight
Supercapacitor Programmable Attiny LED Flashlight: Long time ago, I saw that some drivers in flashlights are using Attiny microcontrollers to deal with different modes. At that time I did not have arduino and I did not know how to program one. Times have changed and my skills in programming grown. I…
xanthium enterprises (@InXanthium)
The latest Tweets from xanthium enterprises (@InXanthium). A website for Embedded System and Robotics enthusiasts. Bengaluru, Karnataka
xanthium enterprises
Several of my crazy projects using Microcontrollers and Robots .You can find the details about my projects here www.xanthium.in
Attiny Canbot
First test run. There is still too much weight in the top half so it takes some time for the robot to balance out.More Information: http://coretechrobotics.b...
ATtiny based bidirectional motor control using L293D
Hello friends,In this ATtiny based Project we will learn to interface L293D with ATMEL ATtiny microcontroller and control them bidirectionally.The microcontroller used here is ATtiny2313A which is interfaced to two L293D motor control chips for controlling upto 4 DC brushed motors.You can control upto 8 motors if bidirectional control is not needed. The ability to control upto
ATtiny 85 EMF detector - Electronics Infoline
arduinomaster @ instructables.com has build an EMF detector based on ATtiny85 mcu able to detect signals from 0-999Hz. He writes:
xanthium enterprises
Getting ready to assemble our ATtiny2313A Development board with twin L293D motor Driver chips.Visit our website to learn more about the board