Dianne Cross
More ideas from Dianne
Calcium Matte Cone 6 base glaze with 0.75 cobalt carbonate and 0.75 copper carbonate added.-Electric Kiln Glaze Recipes - Formulas - John Post

Post's Calcium Matte - ∆ 6 This is the base glaze used with all of the calcium matte tiles on the test tile page. Kentucky OM Ferro frit 3134 : Neph syenite: Wollastonite: Whiting: Flint: cobalt carbonate and copper carbonate added to the base glaze.

Strontium Blue Bronze cone 6 oxidation Glaze Material Percent Lithium Carbonate 1 % Strontium Carbonate 20 Nepheline Syenite 60 Ball Clay 10 Silica (Flint) 9 Total 100

Strontium Blue Bronze oxidation) 1 Lithium Carbonate 20 Strontium Carbonate 60 Nepheline Syenite 10 Ball Clay 9 Silica (Flint) — Cobalt Carbonate 4 Copper Carbonate Usually matte surface. Not food safe, works well on outside of.

John Britt - 70 Nepheline Syenite/ 25 Magnesium Carbonate.5 ball clay. Just try the recipe with soda feldspar and then add frit 2%, 4%, 6%, etc. Up to 12%. cone 5/6 front ones were Red iron 2%, tin 4%, zirconium silicate 8%, cobalt .05%, copper carb. 35, etc. The last ones were stains at 5- 8%.

Just try the recipe with soda feldspar and then add frit etc. Up to cone front ones were Red iron tin zirconium silicate cobalt copper carb. The last ones were stains at

Janet Deboos Teal ^6 ox. Recipe Name: Janet Deboos Teal Cone: 6 Color: Firing: Oxidation Surface: Glossy Amount Ingredient 35 Nepheline Syenite 30 Silica 18 Whiting 12 Frit--Ferro 3134 5 Ball Clay--Old Mine #4 100 Total Additives 8 Tin Oxide 4 Copper Carbonate

Recipe Name: Janet Deboos Teal Cone: 6 Color: Firing: Oxidation Surface: Glossy Amount Ingredient 35 Nepheline Syenite 30 Silica 18 Whiting 12 Frit--Ferro 3134 5 Ball Clay--Old Mine 100 Total Additives 8 Tin Oxide 4 Copper Carbonate

Daniel Oliver Ceramics, Urn Series - "I hand build my work. It gives me freedom to create my pieces. I begin with a slab or extruded piece of clay, add textures on the surface then shape my forms until I am pleased with what I see. I mostly do Raku firing which gives my work an earthy look. I brush, stamp or trail glaze my designs. I started the urn series after a returning customer asked me to make him a box for his mother's ashes. The box had to be the size or holding capacity of a shoe…

Wonderful and unique ceramics by Daniel Oliver Ceramics, Urn Series - "I hand build my work. It gives me the freedom create my pieces.