Diy cabinet doors

Are you wondering how to update your kitchen cabinet doors for cheap? Here is how to update kitchen cabinets without replacing them by adding trim to the cabinet doors. This is an easier way to give your flat cabinet door a makeover. See how you can DIY shaker cabinet doors from your existing doors.

Want to know how to DIY shaker style cabinet doors with no table saw, router table or other special tools? Learn more on the blog.

Shaker Style Cabinet Door Tutorial! ✨ • Easier than you’d think and you end up with a door that’s just as pretty from the front as it is from the back! Be sure to read your hinge instructions before building to account for any extra spacing you may need. • I’m using 1x3 pine boards and 1/4in plywood. I had to run my boards through the table saw blade a couple times to get the desired thickness but you could also buy a thicker blade made for this! • Follow along with me @comestayawhile…

Learn how to make DIY cabinet doors and save yourself a ton of money in the process. This tutorial shows you the best place for storage bases and best materials to use.

Shaker style cabinet doors - the frames

Updating your kitchen doesn’t always mean replacing everything. Sometimes a few strategic updates can make a world of difference. If you have routed cabinet doors that you’re not too fond of, then this blog will help you update them in the simplest way possible.

I'm sharing 7 ways to build a cabinet door so you can choose the one that works best for your skill level and the tools you already have!

Farmhouse Dining Room Makeover with Christmas decor

Easy Cabinet Doors Made on the Router Table: Welcome to Penalty Box Woodshop and I hope you enjoy this video on how to make easy cabinet doors on the router table. This is my go-to way for making cabinet doors wether they are for the shop or for a kitchen remodel. Its a quick and repeatable pr…

I finally made Shaker cabinet doors for our built-in bookcase! I have wanted to make cabinet doors for about 7 years now but I have always been so intimidated…

How to make DIY grooved cabinet doors using just a table saw! Beginner-friendly tutorial with tips and tricks.

Shaker doors are made up of 3 parts - rails (side pieces), stiles (top/bottom piece) and a middle panel. For mine, I used 1x3s for my rails and stiles and 1/4in sanded plywood for the middle panel. I'm using my table saw to make the dado cuts. I need the groove to be 1/4in thick so I am running it through my table saw blade twice. I cut all of my panels and I assemble 3 sides of the frame with pocket hole joinery. Insert your panel and then install the 4th side. Voilà! A beautiful shaker…

Want to make shaker cabinet doors but don't have a router? Find out the easiest ways to make your own shaker cabinet doors for cheap!