Frame clamping jig

Discover Pinterest’s best ideas and inspiration for Frame clamping jig. Get inspired and try out new things.
32 people searched this
·
Last updated 1mo
a man is making a frame out of wood

Mitered frames have a clean look and a timeless appeal. But as a woodworker, they can sometimes be a pain in the neck. The biggest hassle? Gluing the corners together. The miter joint faces slide out of position if you try to use ordinary clamps. The answer to my frustrations came in the form of the frame clamp you see here.

the free diy plans for a simple corner clampping jig

If you’ve ever made a picture frame, particularly using biscuits, you’ve probably ran into the challenge of holding two pieces together at the perfect 90° angle while the glue wood glue is drying. There’s an easy solution to this challenge that you can easily make in just a few minutes. This corner clamping jig design […]

347
a piece of wood that has been cut into pieces with a metal ruler on top

Simple Corner Clamp Jig : In my last build, I made a really large wood picture frame with splines and I thought I'd share how I made a super simple jig to clamp and align the corners during the glue up process. _______________________ Watch the 2 minute video or read on!

1
a pair of wooden rulers are attached to a piece of wood that is being worked on

Adjustable 4 corner framing clamp can be easily made out of various scraps left from the previous projects and its functionality is the same as that of the commercial framing clamps.

38
three pieces of wood sitting on top of each other, with measurements for the sides

When you’re building boxes out of plywood, it’s always good to use clamping blocks to keep things square. These DIY clamping blocks are actually multipurpose. You can use them as corner clips to hold your boards in place at a 90 degree angle while you nail them together, and since they have parallel surfaces you […]

73
a person is working on some kind of machine

MICROJIG on Instagram: "Dovetail Clamp Tenoning Jig by @andre.i.make! What do you think of this? 👍👍 “Here is the jig with the @Microjig system for making tenons on the table saw.” - video/post by @andre.i.make #dovetailclamps #microjig #microjigtools #woodworking #wood #clamps #tablesaw #repost #giftidea"

2
the diy corner clamps are ready to be assembled and put into placemats

In this blog, I will show you step by step how to build adjustable DIY corner clamps to build cabinets. Use the free plans in this blog to build those corner clamp jig. This is a perfect beginner woodworking project. #woodworking #woodworkingplans #woodworkingjigs #cornerclamp #cornerclamps #woodworkingclamps #clampsforwoodworking #diyclamp #diyclamps

816

Related interests

Frame clamping jig and more

Explore related boards