Bedding Impact Tester The Bedding Impact Tester has been designed and manufactured to perform various tests and evaluations of innerspring and boxspring mattresses, as well as foam mattresses, chairs, cushions and other similar products
Colour Check Cabinet The Colour Check Cabinet was produced to answer visual colour matching needs. Used for assessing colour changes under different light sources, to determine suitability of materials for industrial applications where there is the need to maintain colour consistency and quality. Fluorescent daylight, incandescent and optional black light may be used either individually or in combination
The IDM Pneumatic Cutting Press model C0050 is fast and easy to operate, great for cutting of various different sized pieces, allowing a large range of dies to be used with the Cutting Press. Cutting dies can be fixed onto the moving top plate, or sit directly onto the sample, allowing the user to change the dies with ease.
Wet Din Abrader The Wet Din Abrader has been specially designed and manufactured with relevance to international standards to determine the resistance of rubber to abrasion using a cylindrical drum device. It is manufactured from Stainless Steel to enable it to be used with water.
The Edge Compression Guide Blocks are to aid in the determination of the resistance of corrugated fibreboard to a load applied in the plane of the board in a direction parallel to the flutes, ie: parallel to the cross direction of the component sheets. This knowledge can be related to the compression strength of containers when constructed with flutes vertical in vertical faces
The Digital Micrometer is used to measure the thickness of paper, plastic, tissue and other sheeted material. It automatically cycles up and down at the push of a button, providing an accurate and repeatable thickness reading at the end of each cycle. The robust design Digital Micrometer is provided with two plane, parallel, circular pressure faces, between which the material is placed for measurement.
Cobb Moisture Test Ring & Roller This method for measuring water absorption of sized papers is used all over the world. A dry test piece of suitable paper is placed under the cylinder. The 100ml of water is poured over the test piece. After a specified time the water is poured off and the test piece is placed on standardised blotting paper. Another blotting paper is placed on top of the test piece and the excess water is removed by means of the roller
Manual Incline Plane COF This instrument is used to determine the coefficient of static friction of most packaging materials by measuring the angle at which one test surface begins to slide against another inclined surface as the incline is increased at a constant and prescribed rate. As the plane rises, the first sign of movement from the sled is detected by the operator and a recording of the relevant angle of the incline is noted.