7 facts About Tungsten Carbide Burs and how t use them. Tungsten Carbide burrs can be used on: all metals, stone, ceramic, porcelain, hard wood and reinforced plastics.Great for engraving, carving, shaping and cutting. They come in many different shapes, sizes and with different cuts such as single cut flutes and double cut flutes. This article explains all.
DREMEL® EZ SpeedClic: Diamond Cutting Wheel. (SC545)For example concrete, stone, porcelain, ceramic and hard epoxies. The diamond wheel produces a fine cut, is extremely durable, does not break and retains it shape.
4mm - 25mmThese Large Diamond coated Cylinder Burs can be used in your rotary hand drill, die grinder, pendant drill, flexible shaft and drill press. Coated with diamond grit they are great for carving and sculpting in stone, glass, bone, ceramic and hard wood. https://www.eternaltools.com/large-diamond-cylinder-burrs
Involute Gear Cutter by Al8236 -- Well I've got to start somewhere, I've been lurking around here long enough. Here is my approximate involute gear cutter, turned down from some un-known steel from the calculations from this site It was then pack hardened for 2 Hrs. at 1800* F And the teeth honed on a diamond lap. Set up in my homemade knee mill (Witch will be another post as soon as I get a few more pics.) And the final gear. Although I believe I forgot to add the extra for whole depth...