Pinterest • The world’s catalogue of ideas

Nail Making Machine Manufacturers In India

The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically ejected through the ejector.
7 Pins3 Followers

Which type of Raw Material ca used in Nail Making Machine? Generally you can use ms and coil material to produce wire nail some people are also use galvanized wire or other steel use to manufacturers Nail. What is Speed of Nail Making Machine? Well its depend on customer that which type of Nail Making Machine Model Choose it generally Nail Making Machine Speed is 350 Nail Per Minute. It means you can Produce 500 Kg Nail if you’re Nail Making Machine working 8 hour in a day.

1

Pinned from

nailmakingmachine.biz

A wire nail having a head and a shank integral with the head, the shank being formed with a tip and having an axis, and the head having a circumferential edge defining a complete circle; characterized in that the centre of the head is radically offset from the axis of the shank.

Pinned from

nailmakingmachine.biz

Nail Making Machine: Wire Nail Machine | Wire Nail Machine Manufacturer...

Pinned from

nailmakingmachinery.blogspot.com

Nail Making Machine Process This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional Nail Making Machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gears.

Pinned from

nailmakingmachine.biz

A wire nail having a head and a shank integral with the head, the shank being formed with a tip and having an axis, and the head having a circumferential edge defining a complete circle; characterized in that the centre of the head is radically offset from the axis of the shank.

Pinned from

nailmakingmachine.biz

The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically ejected through the ejector.

Pinned from

nailmakingmachine.biz

Our New Develop High Speed Low Noise Automatic Nail Making Machine adopts plunger and oil pipe lubricating structure so as to ensure the features such as high speed, low noise and less impact. Especially, it can make the high quality of nails and other special nails with certain accessories. The assortment of our products is complete. We will supply various machine parts and necessary fine auxiliaries for you.

Pinned from

nailmakingmachine.biz